JVC KD-AR270 Car Stereo System User Manual


 
ENGLISH
9
Sound adjustments
You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).
BAS
(bass)
TRE
(treble)
LOUD
(loudness)
USER
(Flat sound)
00 00 OFF
ROCK
(Rock or disco music)
+03 +01 ON
CLASSIC
(Classical music)
+01 –02 OFF
POPS
(Light music)
+04 +01 OFF
HIP HOP
(Funk or rap music)
+02 00 ON
JAZZ
(Jazz music)
+02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
*
1
Displayed only when “L/O MODE” is set to
“WOOFER” (see page 11).
Indication, [Range]
BAS*
2
(bass), [–06 to +06]
Adjust the bass.
TRE*
2
(treble), [–06 to +06]
Adjust the treble.
FAD*
3
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL*
4
(balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD*
2
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at low volume level.
SUB. W
*
5
(subwoofer), [00 to 08]
Adjust the subwoofer output level when a
subwoofer is connected.
VOL (volume), [00 to 30 or 50*
6
]
Adjust the volume.
*
2
When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”
*
3
If you are using a two-speaker system, set the
fader level to “00.”
*
4
This adjustment cannot affect the subwoofer
output.
*
5
This takes effect only when a subwoofer is
connected.
*
6
Depending on the amplifier gain control
setting. (See page 11 for details.)
Preset values
Indication (For)
Ex.: When “ROCK” is selected
EN06-11_KD-AR270_G220[J]f.indd 9EN06-11_KD-AR270_G220[J]f.indd 9 10/14/05 11:36:21 AM10/14/05 11:36:21 AM