JVC KD-G720 Car Stereo System User Manual


 
22
ENGLISH
Storing DAB services in memory
You can preset six DAB services (primary) for
each band.
1 Select a service you want (see page 21).
2 Select the preset number (1 – 6) you
want to store into.
Tuning in to a preset DAB service
1
2 Select the preset DAB service
(primary) number (1 – 6) you want.
If the selected primary service has some
secondary services, pressing the same
button again will tune in to the secondary
services.
Tracing the same programme—
Alternative Frequency Reception
You can keep listening to the same programme
by activating the Alternative Frequency
Reception.
While receiving a DAB service:
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same programme.
While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same programme as the
FM RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
When shipped from the factory, Alternative
Frequency Reception is activated.
To deactivate the Alternative Frequency
Reception, see page 17.
To change the display information while
tuning to an ensemble
Service name = Ensemble name = Channel
number = Frequency = Clock = (back to the
beginning)
More about this unit
Basic operations
Turning on the power
By pressing SRC on the unit, you can also
turn on the power. If the source is ready,
playback also starts.
Turning off the power
If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Tuner operations
Storing stations in memory
During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
Preset number flashes for a while.
EN18-23_KD-G727_001A_1.indd 22EN18-23_KD-G727_001A_1.indd 22 12/2/05 2:56:54 PM12/2/05 2:56:54 PM