JVC KD-G820 Car Stereo System User Manual


 
12
ENGLISH
Track and folder information (CD/CD Text/
MP3/WMA/USB)
Once you insert a disc or attach a USB
memory, the total track number/total
playing time (for CD/CD Text) and total
folder number/total track number (for MP3/
WMA/USB) appears, then the following
information appears...
Ex.: When “CD-CH” is selected as the source
For the audio CD or CD Text:
Disc name*
4
and Track name*
5
For the MP3/WMA/USB:
Folder name and File name, or
Album/performer*
6
and Track name*
6
When playing CD changer, the total
numbers will not appear.
*
1
Displayed only when an MP3/WMA
track is played back.
*
2
Displayed only when “CD-CH” is selected
as the source.
*
3
Either MP3 or WMA indicator lights up
depending on the detected file.
*
4
Appears only for CD Texts and CDs if
it has been recorded or assigned. (“No
Name” appears if no name is recorded or
assigned.)
*
5
Appears only for CD Texts. (“No Name”
appears if no name is recorded.)
*
6
Appears only when “Tag” is set to “On”
(see page 20).
Playing a USB memory
This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
Removing the USB memory will also stop
playback.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
If a different USB memory is currently
attached, playback starts from the beginning.
To detach the USB memory, straightly pull it
out from the unit.
Cautions:
Avoid using the USB memory if it might
hinder your safety driving.
Make sure all the important data has been
backed up to avoid losing the data.
USB input terminal
USB memory
File type*
1
*
3
Current disc number*
2
Current folder number*
1
Current track number
Elapsed playing time
EN08-15KD-AR870G820[J]1.indd 12EN08-15KD-AR870G820[J]1.indd 12 5/12/05 4:52:52 pm5/12/05 4:52:52 pm