Filter
Top Products
36
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect two external components to this
unit.
Connect one to the CD changer jack on the rear
using the Line Input Adapter KS-U57 (not
supplied), and the other to the MP3 INPUT jack
on the control panel.
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 28.
• If the input level of the external component
connected to the AUX jack is not high enough,
increase the input level properly. (See “To adjust the
auxiliary input level—AUX ADJ” on page 28.)
1
Select the external component
(LINE IN or AUX IN).
To select “LINE IN” (component
connected to the CD changer jack on the
rear), press CD (CD-CH) repeatedly.
• If “LINE IN”* does not appear on the display,
see page 28 and select the external input
(“LINE IN”).
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
To select “AUX IN” (component connected
to the MP3 INPUT jack on the control
panel), press and hold CD (CD-CH).
Note on One-Touch Operation:
When you press CD (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 23 and 24.)
*Not compatible with
digital signals.
Auxiliary input
(MP3 INPUT)*
Portable MP3 player, etc.
CD
LINE IN*
EN36-36KD-SX9350_990[J]f.p65 12/27/02, 5:36 PM36