Filter
Top Products
18
ENGLISH
Other convenient tape functions
RPT MO RND B.SKIP
789101112
SEL
SCM
TAPE 2 3
0
Skipping blank portions on the tape
You can skip blank portions between the tunes. (Blank Skip)
Each time you press RND B.SKIP (Random/Blank Skip) while playing a
tape, the blank skip function turns on and off alternatively.
When this function is on, the B.SKIP indicator lights up on the display and
the unit skips blank portions of 15 seconds or more, fast-forwards to the
next tune, then starts playing it.
• When the tape reaches its end while fast-forwarding, the tape direction will be
changed automatically.
Playing the current tune repeatedly
You can play the current tune repeatedly. (Repeat Play)
Each time you press RPT MO (Repeat/Monaural) while playing a tape,
repeat play turns on and off alternatively. When this function is on, the RPT
indicator lights up on the display.
• Repeat play will be canceled when you change the source or turn off the unit.
Prohibiting tape ejection
You can prohibit the tape ejection and can “lock” a tape in the cassette
compartment.
Press and hold TAPE 2 3 and
0 for more than 2 seconds. “TAPE EJECT”
appears, then “EJECT” flashes on the display for about 5 seconds, and the
tape is “locked.”
To cancel the prohibition and “unlock” the tape, press and hold TAPE
2 3 and
0 for more than 2 seconds again. “TAPE EJECT” appears, then
“EJECT” flashes on the display for about 5 seconds, and the tape is
“unlocked.”
Note:
In the following cases, Blank Skip and Repeat Play may not operate correctly.
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
– The Dolby NR setting does not match. For example, if the tape is recorded with the Dolby C NR.
RND
B.SKIP
RPT
MO
TAPE
(at the same time)
EN15-18.KW-XC770[J]/1 99.11.24, 3:27 PM18