Filter
Top Products
ENGLISH
5
BASIC OPERATIONS
1
2
3
4
1
3
2
Note:
When you use this unit for the first
time, set the built-in clock correctly,
see page 24.
Turn on the power.
“HELLO” appears on the display.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
Select the source.
To operate the tuner, see pages 6 – 11.
To operate the CD player, see pages 12 – 14.
To operate the tape deck, see pages 15 – 18.
To operate the CD changer, see pages 29 – 31.
To operate an external device, see page 32.
C D
CD-
CH
TAPE
FM/AM
Adjust the volume.
Clock time
Volume level
Adjust the sound as you want (see pages 19 – 21).
• If you need to change the spectrum analyzer pattern, see page 22.
To drop the volume in a moment
Press
ATT
briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
ATT
for more than 1 second. “SEE YOU” appears, then the unit turns off.
• If you turn off the ignition key without turning off this unit, the unit will automatically turn on
when you turn on the ignition key next time. If the last selected source is ready for playback
(ex. a CD or a tape is in the unit), playback starts automatically.
ATT
/
SEL
To turn up the
volume
To turn down
the volume
EN02-05.KW-XC770[J]/1 99.11.24, 3:24 PM5