Filter
Top Products
21
ENGLISH
3
Select a PTY code.
• You can display the other PTY codes in
the PTY code list by pressing ∞ or 5.
4
Select the preset number.
5
Repeat Steps
2
to
4
to store other PTY
codes into other preset numbers.
6
Using the Standby Reception
You can use two types of Standby Reception—
TA Standby Reception and PTY Standby
Reception.
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
• If a station (or a service when the DAB tuner
is connected) starts broadcasting a traffic
announcement, “Traffic Information” appears
on the monitor screen, and this unit
temporarily tunes in to the station (or the
service). The volume changes to the preset
TA volume level (see page 24).
To activate TA Standby Reception:
•
If the TP indicator lights up on the display,
TA Standby Reception is activated.
•
If the TP indicator flashes on the display, TA
Standby Reception is not yet activated. (This
occurs when you are listening to an FM
station or a service without the signals
required for TA Standby Reception.)
To activate TA Standby Reception, tune in to
another station (or service) providing these
signals.
The TP indicator stops flashing and remains
lit.
To deactivate the TA Standby Reception:
The TP indicator goes off.
On the main unit
On the main unit
20-24_KD-AV7001[EE]f.p65 4/27/05, 11:55 AM21