Filter
Top Products
51
ENGLISH
AUTO OPEN/CLOSE
• AUTO: The monitor comes out* or goes in
automatically when you turn on or off
the power.
• OFF: Cancels this function.
* If you close the monitor before turning off the
power, the monitor will not come out next time you
turn on the power.
BLIND CONTROL
• ON: The monitor works as Touch Panel
when playing back pictures on the
monitor.
– The boundaries cannot be shown on
the monitor screen. This example
is just to teach you where to touch
on the Touch Panel when you
operate on it.
1 Upper/lower portions:
Adjust the volume.
2 Left/right portions:
• Skips the chapters/tracks for
DVD/VCD.
• Searches the chapters/tracks for
DVD/VCD.
• Searches for TV channels for TV.
(see page 68).
3 Center portion:
Turns on and off the on-screen
icons. (This also works even if
“BLIND CONTROL” is set to
“OFF.”)
• OFF: Cancels this function.
BEEP TONE
• ON: Sound beeps when you operate the
unit.
• OFF: Cancels this function.
WIRING CHECK
You can confirm the wiring connection is
correctly done for particular functions.
• When the listed wires have been connected
and electrical signals are detected through the
wires, the corresponding indicators light up.
Dimmer function
To use the dimmer function, you need to
connect the ILLUMINATION wire to...
• For Auto Dimmer: Connect it to the car
headlight switch. When you turn on the
car lights, dimmer starts working—Auto
Dimmer.
• For Constant Dimmer: Connect it to the
car battery (constant 12V). Dimmer works
whenever you turn on the power.
• For Dimmer Off: Connect it to nowhere.
• See also the Installation/Connection
Manual (separate volume).
Indicators
1
1
2
2
3
48-53_KD-AV7001[EE]f.p65 4/27/05, 11:35 AM51