Filter
Top Products
27
ENGLISH
Before performing any operations, observe
the following...
• For DVD playback, change the Setup
Menu setting (see page 48).
• If “
” appears on the monitor, the disc
cannot accept the operation you have tried.
– In some cases, “
” is not display, but
operations will not be accepted.
1
Insert a disc
The unit turns on, then draws the disc, and
starts playback automatically.
• The monitor does not come out from its
compartment if “AUTO OPEN/CLOSE” is
set to “OFF” (see page 51).
If the monitor does not comes out...
• It take several seconds for the unit to detect
a disc type.
• If a disc menu appears, see page 30.
2
Adjust the volume
3
Operate the disc
: Selects the folder (only for
MP3).
: Stops (see “Stopping play” on
page 82).
• VCD/CD/MP3 playback will
continue endlessly until you
stop it.
: Starts playback.
: Pauses. To resume playback,
press 3.
: Goes back to the beginning of
the current chapter/track, then
skips to the previous chapters/
tracks if pressed repeatedly.
: Skips to the following chapters/
tracks if pressed repeatedly.
To stop play and eject the disc:
Basic Disc Operations
Volume level appears.
Sticker
Sticker
residue
Disc
Stick-on
label
Warped
disc
Do not use the following discs:
25-29_KD-AV7001[EE]f.p65 4/27/05, 11:56 AM27