JVC KD-G407 Car Stereo System User Manual


 
28
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
While holding SEL (select),
press (standby/on
attenuator) for more than
2 seconds to reset the unit.
(Your preset adjustments will
also be erased.) (See page 2.)
Store stations manually.
Connect the aerial firmly.
Insert the CD correctly.
Insert a finalized CD-R/
CD-RW.
Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the CD.
(See page 15.)
While holding
(standby/on attenuator), press
0 (eject) for more than
2 seconds. Be careful not to
drop the CD when it is ejected.
Stop playback while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading slot.
Insert the CD correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer may
have functioned incorrectly due
to noise, etc.
Signals are too weak.
The aerial is not connected
firmly.
CD is inserted upside down.
CD-R/CD-RW is not finalized.
CD is locked.
The CD player may have
functioned incorrectly.
You are driving on rough roads.
CD is scratched.
Connections are incorrect.
No CD in the loading slot.
CD is inserted incorrectly.
Symptoms
Sound cannot be heard
from the speakers.
This unit does not work
at all.
SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
Static noise while
listening to the radio.
CD automatically ejects.
CD-R/CD-RW cannot be
played back.
Tracks on the CD-R/CD-
RW cannot be skipped.
CD can be neither
played back nor ejected.
CD sound is sometimes
interrupted.
•“NO DISC appears on
the display.
CD Playback
General
FM/AM
EN28-31_KD-G407[EE]f.p65 5/3/04, 2:28 PM28