Filter
Top Products
32
ENGLISH
Selecting the scroll mode
You can select the scroll mode for the name display and disc information if it consists of more
than 8 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”
• ONCE: Scrolls only once.
• AUTO: Repeats the scroll (5-second intervals in between).
• OFF: Cancels Auto Scroll.
1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “SCROLL” with
¢ or 4 .
3. Select the desired mode with the control dial.
The scroll mode changes as follows:
Note:
Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1
second.
Setting the name of the external component
You can select the name of the external component which will be shown on the upper part of
the display when you press CD-CH/AUX. When shipped from the factory, the name of the
external component is set to “EXTRA.”
1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “AUX (auxiliary)” with
¢ or 4 .
3. Select the desired source name with the control dial.
The source name to be shown on the upper part of the display changes as follows:
Selecting the frequency cutoff point
When a subwoofer is connected to the unit, you can select the frequency cutoff point to
obtain the response you want. When shipped from the factory, the cutoff point is set to “MID.”
• MID: Frequencies higher than 80 Hz are cut off.
• HIGH: Frequencies higher than 120 Hz are cut off.
• LOW: Frequencies higher than 50 Hz are cut off.
1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “CUTOFF F (frequency)” with
¢ or 4 .
3. Select the desired mode with the control dial.
The frequencies to be cut off change as follows:
AUTOONCE
OFF
EXTRA TV
VIDEO
MD CD
HIGHMID
LOW
EN25-32.KS-FX950R[E]/f 99.12.3, 10:23 PM32