Filter
Top Products
5
ENGLISH
12
RADIO BASIC OPERATIONS
Listening to the radio
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Press FM/AM/DAB repeatedly to select the band (FM or AM).
2 Press and hold
¢ or 4 until “MANU (manual)” starts flashing on the display.
Now you can manually change the frequency while “MANU” is flashing.
3 Press
¢ or 4 repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM–MW/LW) until you release the button.
To tune in FM stations with only strong signals
Press RPT/LO (Repeat/Local) so that the LOCAL indicator lights up on the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
Note:
This function only works while searching FM stations including SSM preset (see page 6).
FM/AM
DAB
Selected band (or clock time: see page 28)
appears.
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
RPT/LO
F1
(FM1)
F2
(FM2)
F3
(FM3)
AM
EN05-08.KS-FX950R[E]/f 99.12.3, 10:21 PM5