Filter
Top Products
17AV MENU
ENGLISH
Continued on the next page
Menu item Selectable setting/item
Disc
Down Mix *
9
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT jacks.
♦
Dolby Surr.
♦
Stereo
: Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
: Normally select this.
D. (Dynamic)
Range Compres.
(Compression) *
9
You can enjoy a powerful sound at a low volume level while playing Dolby Digital
software.
♦
Auto
♦
On
: Select to apply the effect to multi-channel encoded
software.
: Select to always use this function.
Tuner
IF Band Width
♦
Auto
♦
Wide
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
: Subject to the interference from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
Area Setting
♦
US
♦
Europe
♦
SA
: When using in North/Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
: When using in any other areas. FM/AM intervals are set to
50 kHz (100 kHz during auto search)/9 kHz.
: When using in South American countries where FM interval
is 100 kHz. AM interval is set to 10 kHz.
Sirius ID *
10
Your SIRIUS identification number appears on the monitor.
Input
AV Input *
11
You can determine the use of LINE IN and VIDEO IN jacks. ( 47)
♦
Off
♦
iPod (Off)
♦
Audio&Video
♦
Audio
♦
Camera *
12
♦
Navigation
: Select when no component is connected (“
AV-IN
” is
skipped while selecting the source).
: Select when connecting the iPod/iPhone using the USB
Audio and Video cable for iPod/iPhone. ( 45)
: Select when connecting an AV component such as a VCR.
: Select when connecting an audio component such as a
portable audio player.
: Select when connecting a rear view camera to display the
picture (as it is taken).
: Select when connecting a Navigation System. ( 47)
*
9
Selectable only for “
DISC/USB
.” (Playback stops when you change the setting.)
*
10
Appears only when a SIRIUS Satellite Radio is connected.
*
11
Not selectable when “
AV-IN
” is selected as the source.
*
12
The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitor panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
EN12-19_KW-ADV792[J]f.indd 17EN12-19_KW-ADV792[J]f.indd 17 1/13/09 9:19:42 AM1/13/09 9:19:42 AM