JVC KW-ADV792 Car Video System User Manual


 
45EXTERNAL DEVICES
ENGLISH
You can connect the iPod/iPhone using the following cable or adapter:
To Cable/adapter To operate
Listen to the
music
USB 2.0 cable (accessory of the iPod/iPhone) to the
USB cable from the rear of the unit.
See “When connected with the USB
cable” below.
Interface Adapter for iPod, KS-PD100 (not supplied)
to the CD changer jack on the rear of the unit.
See “When connected with the
interface adapter” on page 46.
Watch the video USB Audio and Video cable for iPod/iPhone, KS-U30
(not supplied) to the USB cable from the rear of the
unit.
See “When connected with the USB
cable” below.
• Make sure <iPod (Off)> is selected
for <AV Input>,
17.
When connected with the USB cable
There are 2 control modes in ”
iPod
“ source.
“HEAD MODE” : Control by this unit.
“iPod MODE” : Control by the connected iPod/iPhone.
Make sure <iPod (Off)> is selected for <AV Input> when using KS-U30 to connect. ( 17)
• Press and hold to switch between “HEAD MODE” and “iPod MODE.”
The operation explained below are under “HEAD MODE.”
Listening to the iPod/iPhone
FLAT
REPEAT
AM
3:00
SOURCE
Current Track Title
Artist Name
Album Title
HEAD MODE
iPod
Stops playback
• [5 / ]: Moves to the previous/next item of a category
*
1
• Enters <Search Mode> menu (Hold) *
2
( 25 )
• [4 / ¢]: Selects a track/video
• [4 / ¢]: Reverse/forward search (Hold)
*
1
[5 / ] may not
function depending
on how you select the
current track/video.
*
2
Not applicable in “iPod
MODE.”
Starts playback/pause
Track no./Playing time
Continued on the next page
Indicates the
controlling unit for
playback
~ Press [SOURCE], then press [ iPod].
Playback starts automatically.
When you connect the iPod to the USB
terminal, “
iPod
” is selected as the source
and playback starts automatically.
Ÿ Press [4] or [¢] to select a track/
video.
You cannot resume playback for video sources.
EN38-49_KW-ADV792[J]f.indd 45EN38-49_KW-ADV792[J]f.indd 45 1/12/09 5:47:52 PM1/12/09 5:47:52 PM