Filter
Top Products
39
EXTERNAL DEVICES
Using the Bluetooth cellular phone
When a call comes in...
The source is changed to “Bluetooth PHONE”
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming calls automatically. (☞
page 62)
☞ page 41
When <Auto Answer> is deactivated...
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. (☞ page 62)
~ Press [SOURCE], then press [Bluetooth PHONE]. (☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [AV Menu].
• You can also use AV MENU on the monitor panel.
! Press [Bluetooth].
⁄ Establish the connection with a device, then make a call (or settings using the
<Bluetooth> menu).
☞ pages 61 and 62
Sound mode
(
☞ page 51)
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
Adjust the volume of the incoming calls*
2
[
AV MENU
] Hold: Activates <Voice Dialing>
[5 ∞] Select the registered device
(“New Device” appears when a new device can be
registered.)
*
1
When a cellular phone with audio function is connected, appears.
*
2
This adjustment does not affect the volume level of the other sources.
*
1
EN37-50_KW-AVX900A_f.indd 39EN37-50_KW-AVX900A_f.indd 39 07.3.13 11:40:14 AM07.3.13 11:40:14 AM