Filter
Top Products
72
Symptoms Remedies/Causes
General
• “No Signal” appears. • Change the source.
• Start the playback on the external component connected
to VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
• The buttons on the monitor panel do not
work.
When the monitor panel is open, only VOL +/– and
OPEN/TILT (CLOSE) button work. The other buttons do not
function.
• The unit does not work at all.
Reset the unit. (☞ page 3)
FM/AM
• SSM automatic presetting does not work.
Store stations manually. (☞ page 11)
• Static noise while listening to the radio. Connect the aerial firmly.
Disc in general
• Disc can be neither recognized nor played .
Eject the disc forcibly. (☞ page 3)
• Disc cannot be ejected.
Unlock the disc. (☞ page 19)
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you used
for recording.
• Playback does not start. • Insert the disc correctly again.
• The format of files is not supported by the unit.
• The playback picture is not clear and legible.
Adjust items in <Picture Adjust>. (☞ page 54)
• Sound and pictures are sometimes
interrupted or distorted.
• Stop playback while driving on rough roads.
• Change the disc.
• No playback picture appears on the monitor. Parking brake lead is not connected properly.
(☞ Installation/Connection Manual)
• No picture appears on the external monitor. • Connect the video cord correctly.
• Select the correct input on the external monitor.
• “Eject Error” or “Loading Error” appears on
the monitor.
Changing the source by pressing SOURCE will solve this
error.
• “Region code error” appears on the monitor
when you insert a DVD Video.
Region code is not correct. (☞ page 4)
EN71-77_KW-AVX900A_f.indd 72EN71-77_KW-AVX900A_f.indd 72 07.3.13 11:43:52 AM07.3.13 11:43:52 AM