Filter
Top Products
23
English
CAUTION:
When the source alternates
intermittently between the station
tuned in by the EON function and
the currently selected source,
press EON to cancel the EON
function. This is not a malfunction
of the receiver.
Receiving Radio Broadcasts
Notes:
• EON data sent from some
stations may not be compatible
with this receiver.
•
In EON standby mode, if you
change the source to AM (MW/
LW) or if you carry out
synchronized recording (see
page 37), EON standby mode
is canceled temporarily. The
receiver goes back to EON
standby mode again when you
have finished that operation.
•
While listening to a program
tuned in by the EON function,
you can only use STANDBY/ON
, EON, MASTER VOLUME
(on the front panel) and
AUDIO (on the remote
control).
•
When the receiver is turned off
(into standby mode), the EON
function is also turned off.
CASE 1 If there is no station broadcasting the program you have selected
The receiver continues playing the current source (all sources except AM).
When a station starts broadcasting the program you have selected, the receiver automatically
switches to the station. The indicator of received PTY code starts flashing.
When the program is over, the receiver goes back to the previously selected source, but still
remains in EON standby mode. The indicator of received PTY code stops flashing and
remains lit.
‘
CASE 2 If there is a station broadcasting the program you have selected
The receiver changes the source (all sources except AM), and tunes in the station. The
indicator of received PTY code starts flashing.
When the program is over, the receiver goes back to the previously selected source, but still
remains in EON standby mode. The indicator of received PTY code stops flashing and
remains lit.
To stop listening to the program selected by EON:
Press EON so that the program type (TA/NEWS/INFO) goes
off from the display. The receiver enters EON off mode and
goes back to the previously selected source.
Each time you press EON, the EON mode alternates between
standby mode and off mode.
CASE 3 If the FM station you are listening is broadcasting the program you have
selected
The receiver continues to receive the station but the indicator of received PTY code starts
flashing.
When the program is over, the indicator of received PTY code stops flashing and remains
lit, but the receiver remains in EON standby mode.
‘
‘
‘
EON
RX-554RBK(EE)_0118-001A_En01-23 98.1.30, 2:20 PM23