Filter
Top Products
38
English
Operating Other Components
You can operate JVC audio and video components with this receiver’s remote control.
To operate these components with the remote control, first select a source with the source buttons on the
remote control. Then, operate that source using the remote control.
IMPORTANT:
To operate JVC audio components using this remote control:
• You need to connect JVC audio components through the COMPU LINK-3
(SYNCHRO) jacks (see page 37) in addition to the connections using cables with
RCA pin plugs (see page 7).
• Aim the remote control directly at the remote sensor on the receiver.
77
77
7 After pressing TUNER/BAND, you can perform the
following operations:
TUNER/BAND
Alternates between FM and AM (MW/LW).
1 – 10, +10 Selects a preset channel number directly.
For channel number 5, press 5.
For channel numver 15, press +10, then 5.
For channel number 20, press +10, then 10.
For channel number 30, press +10, +10
then 10.
RDS operating buttons
PTY SEARCH Starts and ends searching a broadcast
using the RDS.
PTY SELECT +/–
Selects a program type.
DISPLAY Changes the RDS display mode.
77
77
7 After pressing CD, you can perform the following
operations on the CD player:
3 Starts playing.
4 Returns to the beginning of the current (or
previous) track.
¢ Skips to the beginning of the next track.
7 Stops playing.
8 Pauses. To resume playing, press 3.
1 – 10, +10 Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For
track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
77
77
7 After pressing CD-DISC, you can perform the following operations on the
CD changer:
1 – 6, 7/P Select the number of a disc installed in a CD changer.
Then continue to operate the CD player as described above.
For example: To find a track number 11 of disc 4
1. Press CD DISC.
2. Press 4.
3. Press CD.
4. Press +10, then 1.
77
77
7 After pressing TAPE, you can perform the following operations on the
cassette deck:
3 Starts playback.
4 Fast winds a tape from right to left.
¢ Fast winds a tape from left to right.
7 Stops operation.
8 Pauses. To resume playing, press 3.
Note:
If you choose a source on the front
panel, the remote control will not
operate that source.
Note:
If you press SOUND CONTROL,
you cannot operate the cassette
deck with this remote control. If
this happens, press TAPE again,
so operating buttons for audio
components will work for the
cassette deck.
CD
456
123
TV VCR AUDIO
EFFECT DELAY
3D-PHONIC
SURROUND
TEST
TAPE
7/P 8 9
10
SEA
PRESET
+10
TUNER/
BAND
VCR
SOUND
CONTROL
CD-DISC
VIDEO
RM-SR554RU REMOTE CONTROL
–+
PHONO
TV/
VIDEO
MUTING
ONE TOUCH
OPERATION
VCR CH
–+
CENTER
–+
REAR
–+
TV CH
–+
TV VOL.
–+
VOLUME
DAP MODE
SEA MODE
PTY SEARCH DISPLAY
–+
PTY SELECT
RX-554RBK(EE)_0118-001A_En24-42 98.1.30, 2:25 PM38