JVC TS-C421SPGU Car Speaker User Manual


  Open as PDF
of 7
 
ENGLISH
4
Attaching the front speakers to the GD-V42XX
series display
Using the speaker brackets, you can attach the front speakers to the side of the display.
• Do not loosen the screws other than the protective screws.
• Use only the supplied mounting screws for attaching the front speaker.
1. Remove the protective screws on the back of the display
with phillips screwdriver.
Before removing them, make sure which screws to
be removed by placing the front speaker.
2. Place the front speaker on the back of the display so that the screw holes
(B) of the speaker bracket are put on those of the display.
3. Tighten the three supplied mounting screws firmly with phillips
screwdriver.
Use the rest of three supplied mounting screws on the other side.
• When moving the display, do not hold the speakers.
• The speakers are not of anti-magnetic type.
Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers.
Protective
screws
Front speaker
Screw hole (B)
Front speaker
Front speaker
Protective
screws
EN_TS-C421SPGU_1.p65 03.3.20, 11:03 AM4
 previous next