Filter
Top Products
JV-TV5020 USER’S MANUAL JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
SECTION 1
1. PURPOSE OF THIS PRODUCT
The purpose of this COLOR QUAD SPLITTER is to provide an
economical, but effective method to monitor more than one area with video
cameras. This Splitter has following features to enable the users to get the
best for their money and efforts:
z Accepts NTSC.
z NTSC : 720x480 Pixels.
z Real time quad picture display.
z PIP (Picture-In-Picture) function.
z 2x ZOOM with Vertical and Horizontal interpolation.
z Full-screen display of one camera.
z Four-position sequential switcher.
z Programmable dwell times to include cameras and the quad
display in the sequential switching mode.
z On-screen-display and programmable menus.
z User-programmed data is protected battery back up.
z Freeze capability can freeze a picture.
Program selectable border line.
5-6. Recording and Playback
There are two video output ports on the rear of the splitter. One
of them is MON port which is for output of the Quadrant pictures
and sequential pictures.
Read the specifications for Time Lapse Recorder or VCR
thoroughly before doing this step, because its manufacturer uses
different methods to record.
a. To record, connect a coaxial cable to the AUDIO IN and VIDEO
IN/OUT port on the rear of the monitor and connect the other
end of the coaxial cable to the VIDEO IN/OUT port on the VCR.
b. Press the “REC” button on the VCR.
c. To play, press the AUTO button of the monitor until it goes to
the VCR mode with black screen and beeping sound.
d. Press the “PLAY” button on the VCR.
e. The recorded picture will be displayed on the monitor.
When you are operating the normal VCR, make sure that the
VCR is in line or A/V mode.
6. IR REMOTE CONTROL
This color quad splitter is also operated by IR Remote Controller.
1