Filter
Top Products
JV-TV5020 USER’S MANUAL JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
Fig. 8 Page 4 Menu
Fig. 7 PAGE2,3 MENU
a. Camera Title
- Place the green color character to the date digit using the
◀ , ▶ , ▲ and the ▼ buttons and press the ENTER
button. The first empty box will be flashing
- Select the position you want to enter the letter or the
numeric number using the ◀ , ▶ buttons.
- ▲ and the ▼ buttons is to change the new character.
- Press the ENTER button to return to the Page 2
INDIVIDUAL menu.
You can enter up to 8 characters for each camera title.
b. Set the DWELL TIME
Dwell Time is the amount of time that a camera is displayed
on the screen when the system is in the Automatic sequential
switching mode. The Dwell Time can be adjusted individually
for each camera and the quad display from 1 to 30 seconds.
When it is set to be zero (OFF) the corresponding camera will
be skipped in the Automatic sequential switching mode.
- Buttons on the Front View
① POWER button is to turn the system ON or OFF.
② REMOTE is IR(Infra-red) sensor.
③ Buttons CH1(ch5), CH2(ch6), CH3(ch7) and CH4(ch8)are to select
a channel.
④ QUAD If press button, conversion and page (Page A, Page B)
conversion in Quad screen .
⑤ ZOOM button displays the 2x ZOOM picture in any mode.
⑥ MODE button displays the PIP or 2PIP.
⑦ MENU button is to go into the on-screen-display mode.
⑧ VCR button displays the VCR video input.
REAR VIEW
Fig. 2 (CONNECTION LOCATIONS – Rear View)
- Connections on the Back View
① CAMERA INPUT (channel 1 to 8) connectors are BNC’s for
composite video input/output.
② VCR IN/OUT is a BNC connector for video input/output.
③ MAIN MONITOR is video out to the monitor.
① ② ③ ④
[ INDIVIDUAL ]
Title Dwell Alm Load
CH1: C 1 03s OFF 75
CH2: C 2 03s OFF 75
CH3: C 3 03s OFF 75
CH4: C 4 03s OFF 75
QUAD A: PAGE 1 03s
EXIT
- PAGE2 -
16