Filter
Top Products
Control Button Features
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
SELECTOR CONTROL KNOB= Used to select the Bread
Proof, Warm & Hold, Bake, Convection Bake, Convection
Roast, Broil or Clean Feature.
BREAD PROOF--
Used to set the WARM & HOLD --
Bread Proof Used to set the
feature. Warm & Hold
feature.
OVEN TEMPERATURE CONTROL KNOB-- Used to select the
Bread Proof, Warm & Hold, or the required Bake, Convection
Bake, Convection Roast, Broil or Clean Temperature.
OVEN TEMPERATURE
INDICATORS -- These
indicators show the current
set temperature in the
oven. /
BROIL-- Used
_, to select the
broil function.
dS/¢_
CLEAN-- Used to
select the Self-
Cleaning cycle.
Lower Oven
CONVECTION
ROAST-- Used
to select the
convection
roasting mode.
BAKE--Used @ _ I'°_
to select the
bake function. _ // CLOCK SET
OVEN INTERIOR _ / PAD-- Used to set
LIGHT PADS-- Use, _/ the time of day.to turn oven interior
CONVECTION BAKE-- light ON and OFF.
Used to select the
Convection Bake feature.
CONVECTION CONVERT
Used to select the
PROBE
PAD-- Used
to set the
TIMER PADS-- Used to set Probe
or cancel the minute timer, feature.
The minute timer does not
start or stop cooking.
SCROLL PADS-- Used
to scroll up or down for
many functions.
CONVECTION CONVERT
Used to select the
Convection Convert feature.
Convection Convert feature.
Setting the Clock
Clock
The ,:_ button is used to set the clock. Until the clock is set, all the other oven functions will not be available. The clock may
be set for 12 or24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range
is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash with "PF".
Clock
When PF flashes in the display, press the [_i!} button. No other button will stop the time from flashing.
To set the clock
Clock
1. Press the button. The control will beep once and the time of day will appear in the display.
2. Tosettheclocktothecurrenttimeofday, pressthe orv[_r buttontoincreaseordecreasethetimeofdayinl minute
increments, or keep the i} or _ button pressed to increase or decrease the time of day in 10 minute increments.
3. Release the button when the desired time is reached. Wait 5 seconds and the change will be accepted.
Changing between 12 or 24 hour time of day display
Clo_k
t. Pressand holdthe _'!i buttonfor6seconds. Thedisplaywill showeither"12"(fort2 hourclock)or"24"(for24hourclock).
2. Press the or button to switch between the t 2 and 24 hour time of day display.
3. Wait 6 seconds to accept the change.