Kenwood DDX319 Car Video System User Manual


 
82 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049
Installing the Microphone
Unit (DDX719/DDX7049BT/
DDX419/DDX4049BT only)
1 Check the installation position of the
microphone (accessory 9).
2 Remove oil and other dirt from the
installation surface.
3 Install the microphone.
4 Wire the microphone cable up to the unit
with it secured at several positions using
tape or the like.
Install the microphone as far as possible from the
cell-phone.
F
ix a cable with a commercial item of tape.
P
eel the release coated paper of double-face
adhesive tape to fix on the place shown above.
A
djust the direction of the microphone to the driver.
Accessory 9
Removing the Unit
(DDX419/DDX4049BT/
DDX319/DDX3049 only)
1 Remove the escutcheon by referring to
the removal procedure in the section
<Removing the Escutcheon>.
2 Insert the two removal tools 6 deeply into
the slots on each side, as shown.
A
ccessory
6
3 Lower the removal tool toward the bottom,
and pull out the unit halfway while
pressing towards the inside.
Be careful to avoid injury from the catch pins on
the removal tool.
4 Pull the unit all the way out with your
hands, being careful not to drop it.
EN_LVT2268-001A_KR.indb 82EN_LVT2268-001A_KR.indb 82 11/11/22 13:5011/11/22 13:50