Kenwood DDX5022 Car Video System User Manual


 
46 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY
1
2
3
4
5
6
7
8
9
10
11
12
1 Displays the various conditions.
: Displays short message status. If a cell-
phone which supports SMS function
is not connected, this mark does not
appear.
: There is unread short message.
: There is no unread short message.
: Downloading Phonebook.
: Indicates there is a call on hold.
: Displays the signal strength.*
The more the number of bar segments,
the stronger the signal.
: Displays the present Auto Answering
status
: When Auto Answering is on
: When Auto Answering is off
: Displays the battery drain of the cell-
phone.*
The more the number of bar segments,
the higher the battery level.
2 Displays the called phone numbers.
If you have registered a phone number in
the Phonebook, the destination person
name is displayed.
3 Calls the displayed preset phone number.
4 Displays the SMS Select screen.
See <SMS (Short Message Service)> (page
55).
5 Displays the Search for Phonebook screen.
See <Calling by Phonebook> (page 48).
6 Displays the Outgoing Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 50).
7 Displays the Incoming Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 50).
8 Calls the preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
54).
9 Displays the Hands-Free Set Up screen.
See <Setting Up the Hands-Free Phone>
(page 51).
p Displays the Dialing Display screen.
See <Calling by Entering a Phone Number>
(page 47).
q Starts voice recognition.
See <Voice Recognition> (page 52).
w Returns to the previous screen.
• While your car is moving, some functions are disabled for
safety’s sake. The buttons associated with the disabled
functions become ineffective if pressed.
• When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
• * Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
the cell-phone. No status is displayed if information
about it cannot be obtained.
• Setting the cell-phone in the private mode can disable
the hands-free function.
When Received a Call
When you receive a call, you can use the hands-
free phone.
1 Respond to a call
2
3
4
1
When a call arrives, the Talking screen appears
automatically.
1 Starts conversation with a person called.
Switches the call destination if you hear a
tone of call-waiting.
Resumes conversation with the person on
hold after completed conversation with the
other party.
2 Disconnects the phone.
3 Switches the voice output between phone
and speaker.
4 Outputs dial tone.
See <Controlling Tone-based Services>
(page 48).
Hands Free Unit Control