Kenwood DDX630WBT Car Video System User Manual


 
English 65
Symptom Remedy/Cause
iPod/iPhone
No sound comes out of the
speakers.
Disconnect the iPod, then connect it again.
Select another source and then reselect “iPod”.
The iPod/iPhone does not turn
on or does not work.
Check the connecting cable and its connection.
Update the firmware version.
Charge the battery.
Check whether the iPod control mode is
correctly selected. ( page 24)
Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the
iPod. For details, visit <http://www.apple.com>.
No operations are available
when playing back a track
containing Artwork.
Operate the unit after the Artwork is loaded. (
page 22)
Sound does not synchronize
with the video.
Select <iPod> for <AV Input>. ( page 42)
Videos cannot be played.
No sound of videos comes
out.
Connect USB Audio and Video cable KCA-iP202.
Other cables cannot be used.
• Select <iPod> for <AV Input>. ( page 42)
USB
“Reading...” keeps flashing on the
screen.
Turn off the power and on again.
While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB
device. Copy tracks again, and try again.
EN_LVT2272-001A_MX_200mm.indb 65EN_LVT2272-001A_MX_200mm.indb 65 11/12/15 13:0411/12/15 13:04