Kenwood DDX630WBT Car Video System User Manual


 
72 DDX630WBT/DDX630WBTM/DDX630W/DDX630WM
Installing the Unit
1 Check the installation position of the
microphone (accessory 4).
2 Remove oil and other dirt from the
installation surface.
3 Install the microphone.
4 Wire the microphone cable up to the unit
with it secured at several positions using
tape or the like.
Install the microphone as far as possible from the
cell-phone.
F
ix a cable with a commercial item of tape.
Accessory 4
Installation on Toyota Car using Brackets
Installing the Microphone Unit
(DDX630WBT/ DDX630WBTM only)
C
ar Bracket
A
ccessory
3
(M5x6mm)
A
ccessory
3
(M5x6mm)
Peel the release coated paper of double-face
adhesive tape to fix on the place shown above.
A
djust the direction of the microphone to the driver.
EN_LVT2272-001A_MX_200mm.indb 72EN_LVT2272-001A_MX_200mm.indb 72 11/12/15 13:0411/12/15 13:04