Filter
Top Products
English
68 English
Setup Menu
Security Code Setup
You can set a security code to protect your
receiver system against theft.
When the Security Code function is activated it can't
be released.
Note, your Security Code is the 4 digit number
entered in your "Car Audio Passport" in this package.
If is not shown, touch
or
to display it.
1
Returns to the Control screen of the previous
source.
2
Calls the Sound Effects Menu. (see page 76)
3
Calls the Setup Menu.
4
Allows you to start security code registration.
5
Turns the SI function On or Off.
If turned "On", the burglar alarm lamp flashes
when the vehicle ignition is off.
If you have already completed the code
registration, the is not displayed.
Set
Security Set Up
Security Set Up
Display the Security Code Setup screen
1
1
Enters a security code.
2
Clears your entry.
3
Cancels the registration and returns to the
Security Code Setup screen.
4
Enters the security code.
—
Input a four-digit number.
Reenter the same security code as that you have
entered in Step 3 for confirmation.
If you enter a different security code, the screen
returns to Step 3 (for the first code entry).
Your security code has been registered.
If you press the Reset button or if you disconnect
your Receiver from the battery after the code
registration, you need to enter the registered
security code.
See below for details.
Enter
Register the security code again
6
Reenter the security code
5
Enter
Register your security code
4
90
Enter a security code
3
Set
Start the security code registration
2
Menu
Security Code
Security
Set
Set Up
SRC
Audio
SI
OffOn
2
1
3
4
5
5
EnterCancelClear
* * * *1st
1
2
3
4
5
6
7
8
0
9
Pass Word
2
3
4
1
DDX7025_E(En)v3.6 04.4.18 5:16 PM ページ68