Kenwood DDX7025 Car Video System User Manual


 
English 95
Troubleshooting Guide
Some system functions are limited to control depending on your setup.
The rear speakers of DTA cannot be set.
The "Channel Level" of rear speakers cannot be set.
"Multi Channel" has been set to "2/0"
or "3/0" (no rear speaker setting) on
the Speaker Set Up screen (page 51).
The subwoofer of DTA cannot be set.
The "Channel Level" of the subwoofer cannot be set.
The center speaker for DTA cannot be set.
The "Channel Level" of the center speaker cannot be set.
"Sub Woofer" has been set to "Off" on
the Speaker Set Up screen (page 51).
No signals can be set.
The "Equalizer" cannot be set.
The "Position" cannot be set.
The "Car Type Setup" value cannot be set.
The "Speaker Setup" value cannot be set.
No crossover frequency can be set.
The "Channel Level" (test signal output) cannot be set.
The Zone Control has been turned
On (page 82).
"Multi Channel" has been set to "2/0"
or "2/2" (no center speaker setting) on
the Speaker Set Up screen (page 51).
DDX7025_E(En)v3.6 04.4.18 5:17 PM ページ95