Filter
Top Products
English
|
65
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select Bluetooth device selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Cell-phone
Select “Settings” > “PAIRING” > “Phone
Selection”.
Audio player
Select “Settings” > “PAIRING” > “Audio
Selection”.
3
Enter Bluetooth device selection mode
Press the [VOL] knob.
“(name)” is displayed.
4
Select the Bluetooth device
Turn the [VOL] knob.
5
Set up the Bluetooth device
Press the [VOL] knob.
“✱(name)” or “-(name)” is displayed.
“✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
6
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Detailed Setup” > “PIN
Code Edit”.
The current setting of PIN code is displayed.
3
Input the PIN code
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [
¢
] button.
Delete the last digit. Press the [
4
] button.
4
Register a PIN code
Press the [VOL] knob.
If “Completed” is displayed, registration is
completed.
5
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.