Filter
Top Products
6
|
DPX503U/DPX303/DPX313
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set”/
“Security Clear”
1 sec.
Sets/Resets security code
17
“SRC Select” “1”*/ “2”
Sets the source selection method.
27
“iPod Mode”*
1
“OFF”/ “ON”*
When set to “ON”, allows you to select music in the manner
similar to that of the iPod.
13
“AT COL CHG”*
1
“OFF”/ “iPod”*
When the iPod source is used, sets whether the illumination
color is changed by the iPod.
28
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec.
Sets the clock.
—18
“Date Adjust”
1 sec.
Sets the date.
18
“Date Mode” 7 types 1 sec.
Sets the date display mode.
“SYNC” “OFF”/ “ON”*
Synchronizing the RDS station time data and this unit’s
clock.
“DSI” “OFF”/ “ON”*
A red indicator will blink on the unit after the ACC is set to
OFF, warning potential thieves.
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed.
—27
“Dimmer” “OFF”/ “ON”*
Dims the display part in conjunction with the light switch
of the vehicle.
“ILM Dimmer” “AUTO”*/ “MNAL”/
“OFF”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
27
“ILM Effect” “OFF”/ “ON”*
Sets whether the illumination color is changed in
conjunction with the key operation. (To connect the
Bluetooth unit)
“ILM MSC SYNC” “OFF”*/ “ON”
Sets whether the key illumination color is changed in
conjunction with the sound volume.
—
“ILM Color”
*
2
“Blue”*/ ”Red”/
”Green”
Sets the button illumination color.
“SWPRE” “Rear”*/ “Sub-W”
Sets the preout output.
27
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
27
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
27
“Supreme” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
27
“AMS Control” 1 sec.
Controls the connected LX amplifier.
—18
“News” “OFF”*/ “00min”
– “90min”
Turns ON/OFF the News Bulletin Automatic Reception
function and sets the news bulletin interrupt disabled time.
28
“Local Seek” “OFF”*/ “ON”
Only stations whose reception is good are searched in auto
seek tuning.
“Seek Mode” “Auto1”*/ “Auto2”/
“Manual”
Selects the tuning mode of the radio.
28
“AF” “OFF”/ “ON”*
When station reception is poor, automatically switches to
the station that is broadcasting the same program over the
same RDS network.
28
“Regional” “OFF”/ “ON”*
Sets whether to switch to the station only in the specific
region using the “AF” control.
“Auto TP Seek” “OFF”/ “ON”*
When traffic information station reception is poor,
automatically searches for a station that can be received
better.
“MONO” “OFF”*/ “ON”
You can reduce the noise when stereo broadcasts are
received as monaural.
“Name Set” 1 sec.
Sets the disc name (DNPS)/ AUX name.
11/12
Function Control
Functions in the table below can be set up by using Function Control.