Filter
Top Products
4 Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type Display
Alphabet upper case "A"
Alphabet lower case "a"
Numbers and symbols "
*
"
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• At registration, up to 12 characters can be entered into each
name.
• Memory numbers
- Total number of FM and AM stations: 30 stations
- 50 disc names can be registered in internal CD player and
external CD changer.
• The title of station/CD can be changed by the same operation
used to name it.
• If this unit is removed from the battery, DNPS/SNPS is erased.
Switching the half screen graphic.
1 Select the half screen graphic
Press the [DISP] button.
Refer to <Display Mode Switching> (page 12).
2 Switch the graphic
Press the [S.A] button.
Each time the button is pressed the half screen graphic switches
as shown below.
Screen Graphic
Graphic 1
Graphic 2
Graphic 3
The half screen graphic cannot be switched in the Standby mode.
Half Screen Graphic Switching
General features
— 14 —
English
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to attach a title to
•A title can't be attached to MD and MP3/WMA media.
• Disc Naming is unavailable when Magazine Random Play is
performed.
2 Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3 Move the cursor to the enter character position
Press the [4] or [¢] button.
Station/Disc Naming (SNPS/DNPS)
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 14