Filter
Top Products
Calling up the TV channels in the memory.
1 Select the TV band
Press the [FM] button.
2 Call up the TV channel
Press the [#1] — [#6] button.
Preset Tuning
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Entering the TV channel and tuning.
1 Select the TV band
Press the [FM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – ch" is displayed.
3 Enter the TV channel number
Press the number buttons on the remote.
Example:
Desired TV channel Press button
5 [#0], [#5]
Direct Access Tuning (Function of remote)
Selecting the TV channel.
1 Select TV source
Press the [SRC] button.
Select the "TV" display.
2 Select the TV band
Press the [FM] button.
Each time the [FM] button is pressed TV bands and Video input
switch.
3 Select the TV channel
Press the [4] or [¢] button.
Tuning
When a commercially available LX BUS Television is connected to this unit,
it can be controlled from this unit.
For functions not described in this instruction manual refer to the instruction
manual for the LX BUS Television.
External TV control features
— 28 —
English
Putting the channel in the memory.
1 Select the TV band
Press the [FM] button.
2 Select the TV channel
Press the [4] or [¢] button.
3 Put the channel in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The channel number display blinks 1 time.
Channel Preset Memory
DPX-8030MD_U.S_r3 02.3.22 3:14 PM Page 28