Filter
Top Products
— 24 —
English
Function Set System
OPEN
¢
4
FM
AM
FNC
#1 - 4
Function mode and setting display
AUTO indicator
FNC indicator
To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the FNC
button to enter the function set mode and then display the
function to make the setting.
Select the mode that you want to make the setting of the
function.
Press the FNC button for at least one second.
"Function Set" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Function items change in the order of features that follow in
the function set system.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "BEEP On" in the display.
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "BEEP Off" is displayed.
Ending the function set mode
Press the FNC button.
• Make sure to end the function set mode when finished.
•To use the auto memory function, press either the 4 or ¢
button for at least two seconds.
•To use the EQ mode function, press either the 4 or ¢
button for at least two seconds.
NOTE
5
4
3
2
1
Function Set System
03.DPX-4020_M_US_PH4 02.6.3 3:54 PM Page 24