Kenwood DPX-4020PH4 Car Stereo System User Manual


 
— 29 —
•The mode switches to the next mode from any mode which
cannot be used.
The external disc control mode will differ depending on the unit
that is connected.
•To enable the selection of External disc control mode 2/AUX
mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
•ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
NOTE
Tuner mode
CD mode
External disc control mode 1
External disc control mode 2/AUX mode
Tape mode
Standby mode
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
During station name input, selects digits and symbols.
38 button
Selects the type of characters at the time of entering the station
name.
4/¢ (TUNE) buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
Use to move the cursor left or right during station name input.
AM/FM buttons
Press the AM button to select the AM band.
Tuner features
4/¢ buttons
Press the 4 button to start play again at the beginning of the
current track.
Press the ¢ button to start play at the beginning of the next
track.
AM button
Rewinds the tape.
FM button
Fast forwards the tape.
38 button
Plays the reverse side of the tape. When pressed during fast
forward and rewind, this button stops the tape and starts playing
it.
Cassette player features
4/¢ buttons
Press the 4 button to search through the tracks backward.
Press the ¢ button to search through the tracks forward.
Use to move the cursor while entering disc name.
DISC buttons (for disc changers)
Press the DISC
button to search through the discs backward.
Press the DISC+ button to search through the discs forward.
Select numbers and symbols while entering disc name.
38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
CD/External disc control features
03.DPX-4020_M_US_PH4 02.6.3 3:54 PM Page 29