Filter
Top Products
English
|
11
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Press the [AM–] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it’s ON, "SubW On" is displayed.
•
You can control this function when 'Switching preout'
(page 25) is set to "SWPRE SW".
SRS WOW Select
You can play back adding gorgeous heavy bass to
the sound and making a 3D sound field.
1
Enter the WOW Select mode
Press the [WOW] button.
"WOW SEL" is displayed.
2
Select the WOW item
Press the [WOW] button.
Each time the button is pressed, the SRS WOW
Select switch as shown below:
SRS WOW
Display
Display
Display
Display
Moves the sound image up a notch and adjusts
bass and the sound field.
"Low"
Moves the sound image up two notches and
adjusts bass and the sound field.
"High"
Changes to the value set in 'SRS WOW Control'.
Changes to the value set in 'SRS WOW Control'.
"User"
Returns to the normal sound without SRS WOW.
"Off"
•
When operation stops for 3 seconds, the SRS WOW
Select closes.
•
WOW: TruBass, FOCUS and SRS 3D are all set to values
shown below.
SRS WOW
SRS FOCUS
SRS TruBass
SRS 3D
High
High
High
High
On
On
Low
Low
On
On
Off
Off
Off
Off
TEL Mute
The audio system automatically mutes when a
call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
Audio Control
1
Enter the Audio Control mode
Press the [AUD] button for at least 1 second.
"AUD mode" is displayed.
2
Select the Audio item for adjustment
Press the [FM+] or [AM–] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3
Adjust the Audio item
Press the [
4
] or [
¢
] button.
Adjustment Item
Adjustment Item
Adjustment Item
Display
Display
Display
Display
Range
Range
Range
Balance
"BAL"
Left 15 — Right 15
Left 15 — Right 15
Fader
"FAD"
Rear 15 — Front 15
Sub woofer level
*¹
"SubW"
–15 — +15
Bass boost level
*²
"AmpB"
"AmpB"
Flat/+6/ +12/ +18 (dB)
Central frequency boost
Central frequency boost
*²
"AmpF"
"AmpF"
Normal/ Low
Low Pass Filter
*¹
"LPF"
Through/120/80/50 Hz
Through/120/80/50 Hz
Volume offset
"V-OFF"
–8 — ±0
•
*¹
You can control this item when 'Subwoofer Output'
(page 11) is set to "SubW On".
•
Volume offset: Each source’s volume can be set as a
difference from the basic volume.
•
*²
- Refer to the catalog or instruction manual for
power amplifiers that can be controlled from this
unit.
- For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AmpB +18" won't work
correctly even if it's selected.
4
Exit the Audio Control mode
Press the [AUD] button.