Filter
Top Products
English
|
15
Adjusting Clock
1
Select the clock display
Press the [DISP] button.
2
Enter clock adjustment mode
Press the [DISP] button for at least 1 second.
The
‡
indicator blinks.
3
Adjust the hours
Press the [FM+] or [AM–] button.
Adjust the minutes
Press the [
4
] or [
¢
] button.
4
Exit clock adjustment mode
Press the [DISP] button.
User Illumination Color Setting
The Illumination Color by the adjustment of RGB
can arbitrarily set.
1
Enter the Illumination Color Select mode
Press the [COL] button.
"Illumi" is displayed.
Illumination Color Select
Setting the color of the display.
1
Enter the Illumination Color Select mode
Press the [COL] button.
"Illumi" is displayed.
2
Select the Illumination Color
Press the [COL] button.
Each time the button is pressed, the Illumination
Color switches as shown below:
Illumination Color
Display
Display
Display
Scan of "Blue" to "Mint"
"V.Color"
Blue
"Blue"
Mars Red
"Mars Red"
White
"White"
Lavender
"Lavender"
Muscat
"Muscat"
Pink
"Pink"
Sky Blue
Sky Blue
"Sky Blue"
"Sky Blue"
Lime
"Lime"
Violet
"Violet"
Aqua
Aqua
"Aqua"
"Aqua"
Orange
Orange
"Orange"
"Orange"
Mint
"Mint"
User Color
"RX/GX/BX"
•
"User Color" enables the color set in 'User Illumination
Color Setting' (page 15) to be recalled.
3
Exit the Illumination Color Select mode
Press the [COL] button for at least 1 second.
When operation stops for 10 seconds, the
Illumination Color at that time is registered and
the Illumination Color Select mode automatically
closes.
2
Select the Color for adjustment
Press the [
4
] or [
¢
] button.
Each time the button is pressed, the colors that
can be adjusted switch as shown below:
Adjustment Color
Adjustment Color
Display
Display
Display
Red
"R" is blinks
Green
"G" is blinks
Blue
"B" is blinks
3
Adjust the Color
Press the [FM+] or [AM–] button.
Each time the button is pressed, the intensity of
color changes as shown below:
Intensity of color
Intensity of color
Intensity of color
Display
Display
Display
Turning off
Turning off
"X0"
Weak
"X1"
…
…
Dark
"X4"
4
Exit the Illumination Color Select mode
Press the [COL] button for at least 1 second.
When operation stops for 10 seconds, the
Illumination Color at that time is determined and
the Illumination Color Select mode automatically
closes.