Filter
Top Products
16
|
English
General features
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
•
Refer to the 'Switching Display' (page 14) and select
either "DNPS" or "SNPS". No name can be attached to
the source if "DNPS" or "SNPS" cannot be selected for
it.
2
Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
"Name Set" is displayed.
3
Move the cursor to the enter character
position
Press the [
4
] or [
¢
] button.
4
Select the character type
Press the [
38
] button.
Each time the button is pressed the character
type switches as shown below.
Character type
Character type
Character type
Display
Display
Display
Alphabet upper case
Alphabet upper case
"A"
Alphabet lower case
Alphabet lower case
"a"
5
Select the characters
Press the [FM+] or [AM–] button.
•
Characters can be entered by using a remote with a
number buttons.
Example: If "DANCE" is entered.
Character
Button
Times pressed
Times pressed
"D"
[3]
1
"A"
[2]
1
"N"
[6]
2
"C"
[2]
3
"E"
[3]
2
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
•
When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
•
Memory numbers
- FM & AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
•
The title of station/CD can be changed by the same
operation used to name it.
Auxiliary Input Display Setting
Selecting the display when this device is switched
to Auxiliary input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2
Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2
seconds.
"Name Set" is displayed
3
Select the Auxiliary input display
Press the [
4
] or [
¢
] button.
Each time the button is pressed it switches
through the below displays.
• "AUX"
• "TV"
• "VIDEO"
• "GAME"
• "PORTABLE"
• "DVD"
4
Exit Auxiliary input display setting mode
Press the [NAME.S] button.
•
When operation stops for 10 seconds, the name
at that time is selected, and Auxiliary input display
setting mode closes.
•
The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.
•
If this unit is removed from the battery, the Auxiliary
Input name is returned to "AUX".