Filter
Top Products
Function of the KDC-8080R
Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately.
The factory default is rear preout.
Display and setting:
"SWPRE Rear" : Rear preout
"SWPRE N-Fad" : Non-fading preout
You cannot use the high-pass filter with non-fading preout.
NOTE
Switching preout
You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
Display and setting:
"OFF WAIT" : 0sec / 3sec / 5sec / 10sec / 15sec / 20sec /
25sec (sec=sec.)
If you do not slide the faceplate lock switch during the period
which you have set, the unit’s power turns off after the control
panel is automatically hidden.
NOTE
Time setting for removing the faceplate
This function allows you to turn off the graphic part of the
display if there is too much information in the display.
Display and setting:
"BLACK MASK ON" : The display will be shown in horizontally
divided mode. When this function is
enabled, the dual display mode is entered
and ••• (CD-IN) indicator is displayed.
Clock alone is displayed in the lower part.
"BLACK MASK OFF" : The display will turn on by using the
whole part of the display.
This function cannot be set in the full-screen display and
horizontal division display.
NOTE
Black Mask
You can turn the movement of graphic display on and off.
The initial setting is ON.
Display and setting:
"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.
Switching Graphic Display
You can dim the display.
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.
NOTE
Dimmer
— 35 —