Filter
Top Products
TEL MUTE
EXT.CONT
P.CONT.OUT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
REAR
FRONT
NON-FAD
English
— 42 —
Connecting Cables to Terminals
Front left output (White)
Front right output (Red)
Non-fading right output (Red) (KDC-PS9080R only)
Rear right output (Red) /
Non-fading right output (Red) (KDC-8080R only)
Rear left output (White) /
Non-fading left output (White) (KDC-8080R only)
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (
+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
KENWOOD disc changer / DAB control input /
Display Data Output Jack
Battery cable (Yellow)
Ignition cable (Red)
FM/AM
antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
To connect the Disc changer or DAB unit, consult each
manual.
NOTE
Wiring harness
(Accessory1)
If no connections are
made, do not let the cable
come out from the tab.
NOTE
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
Power control/ Motor antenna
control cable (Blue/White)
Connect either to the power control
terminal when using the optional power
amplifier, or to the antenna control terminal
in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector B
Fuse(10A)
Connector A
TEL mute cable (Brown)
To connect the KENWOOD navigation
system, consult your navigation manual.
NOTE
Outputs data representing the unit's current state, causing it
to appear in the external display.
To connect to this jack, a converting adapter (optional) is
necessary.
External amplifier
control cable
(Pink / Black)
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp control
function.
DC/DC converter box (Wrap the cushion (Accessory0)
around this box.)
Separate this box from the unit and antenna cords. If they
are too close, it may cause the reception to get noise.
2CAUTION
Non-fading left output (White) (KDC-PS9080R only)