Kenwood KDC-HD545U Car Speaker User Manual


 
English
|
15
3 Select the name
Operation type Operation
Move to the next phone
number.
Turn the [VOL] knob.
Move to the next name. Press the [
4
] or [
¢
] button.
4 Make a call
Press the [VOL] knob.
• To use the Phone Book, it must be downloaded to this
unit in advance. Refer to <Downloading the Phone
Book> (page 24).
• During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
Calling a Number in the Call Log
1 Select the call log mode
For how to select dialing method, refer to <Making
a Call> (page 14).
Select the “OUT-CALL (outgoing call), “IN-CALL
(incoming call), or “MISSED CALLS (missed call)
display.
2 Select a name or phone number
Turn the [VOL] knob.
3 Make a call
Press the [VOL] knob.
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
1 Select the number dial mode
For how to select dialing method, refer to <Making
a Call> (page 14).
Select the “NUMBER DIAL” display.
2 Enter a phone number
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [
¢
] button.
Delete the last digit. Press the [
4
] button.
• Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
3 Make a call
• Press the [VOL] knob.
• Press the [OK] button on the remote
controller.
• You can input max 25 digits.
Make a Voice Dialing Call
1 Enter voice recognition mode
KDC-BT645U: Press the [VOICE] button.
KDC-HD545U:
Press the [VOL] knob for at least 1 second, and
then press the [BAND] button.
“V-RECG READY” is displayed.
2 Press the [VOL] knob.
“PB NAME” is displayed.
When a beep is heard, say the name within 2
seconds.
3 “PN TYPE” is displayed.
When a beep is heard, say the category name
within 2 seconds.
4 Make a call
Press the [VOL] knob.
Move to the next phone number
Turn the [VOL] knob.
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. (page 39)
• Both the name and category require registration of a
voice tag. (page 26)
• Audio sound is not output during voice recognition.
Registering to the Preset Dial Number
(Preset Memory)
1 Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2 Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.