Filter
Top Products
English
|
13
Selecting the Source
Press the [SRC] button.
Source required Display
Tuner "TUNER"
CD "Compact Disc"
External disc (Optional accessory) "CD Changer"
Auxiliary input "AUX"
Standby (Illumination only mode) "STANDBY"
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicles battery.
The time until full power OFF can be set in 'Power OFF
Timer' (page 52).
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator
turns ON or OFF.
When it’s ON, "ATT" is displayed.
Rotary Volume knob operation
mode select
The rotary volume knob can be used for volume
adjustment and various function setups.
Available setup functions
The rotary volume knob can be used for the
following setup:
• Menu system : Item selection
• Audio Control : Adjustment of setup value
• Audio Setup : Adjustment of setup value
• Display control : Display switching
• Disc Naming : Character selection
• Folder select : Folder search
• You can select the Rotary Volume Operation mode
only when the "
" indicator is displayed above
the [1] button during any function setup.
• When the "
" indicator is ON, you cannot use the
rotary volume control for function setup and sound
level adjustment.
To use the rotary volume knob:
1 Turn the rotary volume operation ON
See the 'Rotary volume operation select' (54
page) and select "Rotary SEL: ON".
2 Selecting the Rotary Volume Operation
mode
Press the [1] button.
When it’s ON, the " " indicator blinks.
3 Setting the function
Rotate the Rotary Volume knob.
4 Terminates the function setup using the
rotary volume knob
Press the [1] button.