Filter
Top Products
30
|
English
Sound management features
Function of the KDC-PSW9527/KDC-W9027
Audio Setup (PRO mode)
1
Selects the PRO mode of Audio setup
See the 'Audio Setup' (page 50) and select "Audio
Setup: PRO".
2 Select the Audio Setup item for adjustment
Select an audio setup item you wish to adjust by
referring to Step 2-5 of 'Audio Setup (Easy mode)'
(page 28).
1st section
Function of the KDC-W9027
Multi-function key operation
Audio setup Item
[2]
"X’Over"
[2] "FRONT"
[3] "REAR"
[4] "SW"
[4] "PHASE"
High Pass Filter Front
High Pass Filter Rear
Low Pass Filter Subwoofer
Subwoofer Phase setting
[3]
"DTA"
[2] "FRONT"
[3] "REAR"
[4] "SW"
DTA Front
DTA Rear
DTA Subwoofer
[4] *
"EQ"
[2] "FRONT"
[3] "REAR"
[2] "BASS"*
[3] "MID"*
[4] "TRE"*
[2] "BASS"*
[3] "MID"*
[4] "TRE"*
EQ Front Bass setting
EQ Front Middle setting
EQ Front Treble setting
EQ Rear Bass setting
EQ Rear Middle setting
EQ Rear Treble setting
[5]
"SP-
LEV"
*
2
[2] "FRONT"
[3] "REAR"
[4] "SW"
[5]
"T-TONE"
[2] "Front-L"
[2] "Front-R"
[3] "Rear-L"
[3] "Rear-R"
SP-LEV Front Left
SP-LEV Front Right
SP-LEV Rear Left
SP-LEV Rear Right
SP-LEV Subwoofer
SP-LEV Test tone
Function of the KDC-PSW9527
Multi-function key operation
Audio setup Item
[2]
"X’Over"
[2] "FRONT"
[3] "REAR"
[4] "CNTR"
[5] "SW"
[5] "PHASE"
High Pass Filter Front
High Pass Filter Rear
High Pass Filter Center
Low Pass Filter Subwoofer
Subwoofer Phase setting
[3]
"DTA"
[2] "FRONT"
[3] "REAR"
[4] "CNTR"
[5] "SW"
DTA Front
DTA Rear
DTA Center
DTA Subwoofer
[4]
"EQ"
[2] "FRONT"
[3] "REAR"
[4] "CNTR"
[2] "BASS"*
[3] "MID"*
[4] "TRE"*
[2] "BASS"*
[3] "MID"*
[4] "TRE"*
[2] "BASS"*
[3] "MID"*
[4] "TRE"*
EQ Front Bass setting
EQ Front Middle setting
EQ Front Treble setting
EQ Rear Bass setting
EQ Rear Middle setting
EQ Rear Treble setting
EQ Center Bass setting
EQ Center Middle setting
EQ Center Treble setting
[5]
"SP-
LEV"
*
2
[2] "FRONT"
[3] "REAR"
[4] "CT/SW"
[5] "T-TONE"
[2] "Front-L"
[2] "Front-R"
[3] "Rear-L"
[3] "Rear-R"
[4] "
Center
"
[4]
"Sub Woofer"
SP-LEV Front Left
SP-LEV Front Right
SP-LEV Rear Left
SP-LEV Rear Right
SP-LEV Center
SP-LEV Subwoofer
SP-LEV Test tone
• * The followings can be adjusted each time button [2]
"BASS", button [3] "MID" or button [4] "TRE" of "EQ"
functions is pressed.
[2]"BASS" "BASS F" (Bass Center Frequency)
"BASS L" (Bass Level)
"BASS Q" (Bass Q Factor)
[3]"MID" "MID F" (Middle Center Frequency)
"MID L" (Middle Level)
"MID Q" (Middle Q Factor)
[4]"TRE" "TRE F" (Treble Center Frequency)
"TRE L" (Treble Level)
"TRE Q" (Treble Q Factor)
• *
2
You can listen to the "T-TONE" when you have
tuned it. The sound level is reduced when "T-TONE"
is selected. The sound returns to the normal level
when the original source is selected.
• X'over (Crossover Network Setup)
You can manually set a crossover frequency of
speakers.
• DTA (Digital Time Alignment)
Manually set the sound output timing of each
channel.
• EQ (Equalizer)
You can manually set the equalizer curve.
• SP-LEV (Speaker Level)
Set the volume at each setup position.