Filter
Top Products
English
|
25
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it’s ON, "SUB WOOFER ON" is displayed.
• When the 'Dual Zone System' is ON, each of the
following setup is ignored.
- "WOW"/ "PLII"/ "POSI"/ "PHASE"
('Audio control' (KDC-PSW9527/W9027) (page 26))
- "X'over"/ "EQ"/ "DTA"
('Audio Setup (PRO mode)' (page 30))
- System Q
('System Q' (KDC-PSW9527/W9027) (page 21))
- WOW/ X'OVER
('Audio Control' (KDC-W8027) (page 22))
• The Dual Zone System can be used only when you
have set the rear speaker to any mode other than
"None" in the 'Audio Setup (Easy mode)' (page 28).