Filter
Top Products
10
|
KDC-BT40U/KDC-BT30
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button.
Select the “TUNER” display.
Selecting the Receiving Band
Press the [BAND] button.
Each time you press the button, the receiving band
alternates between the FM1, FM2, FM3 and AM.
Selecting the Receiving station
Press the [4] or [¢] button.
During reception of stereo stations the “ST”
indicator lights up.
Selecting the preset channel
Press the [1] – [6] button.
Traffic information
Press the [ ] button for at least 1 second.
Turns ON or OFF the Traffic Information function.
When the function is set to ON, “TI” indicator lights
up.
If traffic bulletin starts when the function is ON,
“TRAFFIC INFO” (“TRAFFIC”) is displayed and traffic
information is received.
Station Preset Memory
Putting a station in the memory.
1 Select the frequency to put in the memory
Press the [4] or [¢] button.
2 Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.
⁄
• Up to 6 stations with a different band (FM/AM) can be
memorized to the [1] – [6] button according to the
setting of “PRESET TYPE” of <Initial Setting> (page 18).
Tuner Setting
You can select following Tuner Setting items.
1 Select the TUNER source
Press the [SRC] button.
Select the “TUNER” display.
2 Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
“FUNCTION” is displayed.
3 Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SETTINGS” > Function item.
Function item Selectable setting/item
“LOCAL SEEK”
Only stations whose reception is good are searched
in auto seek tuning. (FM band only)
OFF/ON
“SEEK MODE”
Selects the tuning mode of the radio.
AUTO1: Automatic search for a station.
AUTO2: Search in order of the stations in the Preset
memory.
MANUAL: Normal manual tuning control.
“AUTO MEMORY”* Putting stations with good reception in the memory
automatically.
NO/YES
“MONO SET”
You can reduce the noise when stereo broadcasts
are received as monaural. (FM band only)
OFF/ON
“NEWS SET”
Automatically receives news bulletin when it starts.
Set the time during which interrupt is to be disabled
after start of another news bulletin.
Changing “NEWS 00M” to “NEWS 90M” turns this
function ON. If news bulletin starts when this
function is ON, “NEWS” is displayed and news is
received. If “20M” is has been set, reception of
another news bulletin will not start for 20 minutes.
The news bulletin volume is the same level that
was set for Traffic Information.
OFF/00M — 90M
“AF SET”
When station reception is poor, automatically
switches to the station that is broadcasting the
same program over the same RDS network.
OFF/ON
“RDS REGIONAL”
“RDS REG”
Sets whether to switch to the station only in the
specific region using the “AF” control.
OFF/ON
“AUTO TP SEEK”
(“ATP SEEK”)
When traffic information station reception is poor,
automatically searches for a station that can be
received better.
OFF/ON
(Factory setting: Underlined)
[SRC]
[VOL]
[1]
—
[6]
[
] / [
E
]
[
]
[BAND]
[
]