Filter
Top Products
9ENGLISH
1 Enter Function Control settings.
2 Select “TUNER CTRL.”
Listening to the radio
~
]
“TUNER”
Ÿ
]
“F1,” “F2,” “F3,” or “AM”
!
“ST” lights up when receiving an FM
stereo broadcast with sufficient signal
strength.
You can select or set the <TUNER CTRL> settings while listening to the radio.
Item Selectable setting, [ Initial ]
SEEK MODE
Tuning mode
Selects the tuning mode for
4
/
¢
buttons.
• AUTO1
• AUTO2
• MANU
: Automatically search for a station.
: Search in order of the stations in the preset memory.
: Manually search for station.
A-MEMORY
Automatic
presetting
You can preset up to 6 stations for each FM and AM band.
• START *
1
• CANCEL
: Automatically search for stations and stored in to the memory.
“A-MEMORY” flashes on the display during search.
: Returns to item selection menu.
CRSC SET *
2
Clear Reception
Stereo Control
setting
• ON *
3
• OFF
: Improve the FM reception, (but the stereo effect may be lost).
: Cancels. The stereo effect may be restored automatically
(depending on the reception condition).
*
1
All previously stored stations are erased and stations are stored anew. The station stored in the lowest
preset number will be automatically tuned in.
*
2
Displayed only when the source is “TUNER (F1 / F2 / F3).”
*
3
Strong electrical fields (such as from power lines) may cause unstable sound quality when <CRSC SET> is
set to <ON>. In such situation, set to <OFF>.
3 Turn the control knob to make a
selection, then press to confirm.
See table below for selection.
4 Finish the procedure.
[Hold]
EN02-11_KDV-MP3346M[U]f.indd 9EN02-11_KDV-MP3346M[U]f.indd 9 11/26/09 4:02:27 PM11/26/09 4:02:27 PM