Filter
Top Products
5
You cannot operate when the wide picture navigation
is displayed.
Each time you press the PWR button, the AV output
mode switches as follows:
●When the Video Box Unit is connected
▼
[NORMAL]: Picture/sound with monitor picture
▼
[VIDEO1]: Picture/sound with video1
▼
[VIDEO2]: Picture/sound with video2
▼
[NAV]: Sound with navigation
●When the KTC-V800N or KTC-V800P is connected
▼
[NORMAL]: Picture/sound with monitor picture
▼
[TV]: Picture/sound with television
▼
[NAV]: Sound with navigation
When connecting KTC-V800N/KTC-V800P,” on
changing “AV-IN1” “AV-IN2” settings to “VD” (see
Setting the System, page 6) the switching items
become VIDEO1 and VIDEO2.
Press the SCRN button, the picture quality
adjustment screen to be displayed.
Each time you touch [ 3 ]/[ 2 ] to adjust the value.
[BRT] (for Day time screen)
Touch [ 3 ] for a brighter screen.
Touch [ 2 ] for a darker screen.
[TIN]
Touch [ 3 ] for a stronger green level.
Touch [ 2 ] for a stronger red level.
[COL]
Touch [ 3 ] for a deeper color.
Touch [ 2 ] for a paler color.
[CONT]
Touch [ 3 ] for less contrast.
Touch [ 2 ] for stronger contrast.
[BLK]
Touch [ 3 ] for less black level.
Touch [ 2 ] for a stronger black level.
[DIM] (for Night time screen)
Touch [ 3 ] for a brighter screen.
Touch [ 2 ] for a darker screen.
Touch [ OK ] to end the picture quality adjustment
screen.
•The [ TIN ] and [ COL ] cannot be adjusted for the
navigation screen or the setting screens.
• The [ TIN ] cannot be adjusted for the picture of PAL.
• [BRT] and [DIM] initial values are maximum.
• As regards [DIM] adjustment:
•When the condition is bright around the periphery of
the monitor unit, the brightness does not change
even when [DIM] is adjusted.
•When set to maximum, even if the monitor unit
periphery dims, there is no change in from the
brightness set with [BRT].
• There is no connection with the vehicle’s
illumination switch. (A sensor is installed facing the
front of monitor unit for light detection).
• If you make no key operation for 10 seconds, the
picture quality adjustment screen is automatically
cancelled.
NOTE
3
2
1
Adjusting the Picture Quality
NOTE
Switching the AV Output
NOTE
[ NORMAL ]
[ JUST ]
[ CINEMA ]
TV1
WD
SEEK BAND
A
UT
O1
SPNORMA
LOV
FULL
AVNORMA
1
LL
Screen mode
AV output mode
Tuning mode
Channel No.
TV band
Speaker mode
Speaker volume level
<On Screen Display>
If the monitor's buttons operated while a TV, video or navigation picture is displayed, the receiving
channel No., the picture settings, AV output settings, etc., are superimposed on the picture .
Tuning mode,TV band, and Channel No.: When the KTC-V800N/ KTC-V800P is connected.
NOTE
LZ_800W_English_ver4 02.12.16 1:17 PM Page 5