Filter
Top Products
English
8
TV Control Function < When The KTC-V800N/KTC-V800P is connected >
Press the V.SEL button repeatedly to select the TV
picture.
Touch the part C to switch to the TV control screen.
Each time you touch [ BAND ], the preset band
switches between the TV1 and TV2.
You can choose from three tuning modes: auto
seek, preset station seek, and manual. The
“AUTO1” indicator is displayed when auto seek
tuning is selected, and the “AUTO2” indicator is
displayed when preset station seek tuning is
selected.
Each time you touch [ SEEK ], the mode switches as
follows:
▼
AUTO 1: Auto Seek Tuning
▼
AUTO 2: Preset Station Seek Tuning
▼
MANU: Manual Tuning
Auto Seek Tuning (AUTO1)
Touch [ ¢ ] to seek for channels up the band.
Touch [ 4 ] to seek for channels down the band.
Preset station Seek Tuning (AUTO2)
Touch [ ¢ ] to move to the next preset station (i.e.,
the one with the next highest number).
Touch [ 4 ] to move to the last preset station (i.e.,
the one with the next lowest number).
Manual Tuning (MANU)
Touch [ ¢ ] to increase the channel by one step.
Touch [ 4 ] to decrease the channel by one step.
Store the channel of the station currently being
listened to. You can then recall that station with a
single touch of a button.
Select the station that you want to store.
Keep touching the preset station number [ P1 ] - [ P8 ]
on which you want to store the station, for two
seconds or more.
You can store 8 stations in each of the TV1 and TV2
preset bands.
You can automatically store all the receivable
channels in the band currently being listened to,
and then recall them with the touch of a button
later. This function is especially useful when you
are travelling and do not know what stations are
available. Up to 8 stations can be stored this way.
Select the preset band for auto memory entry.
Touch [ AME ].
[ 4 ] and [ ¢ ] blink.
Touch [ 4 ] or [ ¢ ] to start auto memory entry.
The preset station numbers [ P1 ] - [ P8 ] are shown in
order.
When all the stations on a certain band have been
stored in the preset memory, the auto memory entry
stops. The tuner then plays the last station received.
Touch the preset station number [ P1 ] - [ P8 ] for the
desired station. The number of the recalled station is
displayed.
Recalling a Preset Station
3
2
1
Auto Memory Entry
NOTE
2
1
Station Preset Memory
Selecting the Channels
Selecting the Tuning Mode
Selecting the Preset Bands
2
1
Switching to the TV Control Screen
8P5 10P6 12P7 47P8
1P1 3P2 4P3 6P4
AME
TV1
SEEK BAND
A
UT
O1
OK
10
TV Control Screen
TV picture screen
A
D
B
C
LZ_800W_English_ver4 02.12.16 1:17 PM Page 8