Filter
Top Products
English
6
System Setup Function
●When the Video Box Unit is connected
Press the SCRN button for at least one second to
switch to the setup menu screen.
Touch [ SYSTEM ] to switch to the system setting
screen.
Setting the Navigation Input Mode [NAV]
Touch [ RGB ], [ VD1 ] or [ VD2 ]. The navigation input
mode will be switched as follows:
[RGB]: When the Navigation unit is connected to the
"RGB" terminal.
[VDI]: When the Navigation unit is connected to the
"AV-INPUT1" terminal.
[OFF]: When the Navigation unit is not connected.
(When the Video Deck is connected to the
"AV-INPUT1" terminal.)
Setting the AV Output Mode [AV-OUT]
Touch [ NORM ], [ NAV ], [ VD1 ] or [ VD2 ]. The
picture/ sound of the AV output mode will be
switched as follows:
[NORM]:Picture/sound with monitor picture
[NAV]: Sound with navigation
[VDI]: Picture/sound with video1
[VD2]: Picture/sound with video2
Setting the Touch Sensor Tone [BEEP]
Touch [ ON ] or [ OFF ] to switch the function on
and off.
[ON]: Touch sensor tone is turned on
[OFF]: Touch sensor tone is turned off
Touch [ RTN ] to return to the setup menu screen.
●When the KTC-V800N or KTC-V800P is connected
Press the SCRN button for at least one second to
switch to the setup menu screen.
Touch [ SYSTEM ] to switch to the system setting
screen-1.
Setting the AV Input 1 Mode [AV-IN1]
Touch [ VD ], [ NAV ] or [ OFF ]. The picture/ sound of
the AV input mode will be switched as follows:
[VD]: When the Video Deck is connected to the
"AV-INPUT1" terminal.
[NAV]: When the Navigation unit is connected to the
"AV-INPUT1" terminal.
[OFF]: When the "AV-INPUT1" terminal is not used.
Setting the AV Input 2 Mode [AV-IN1]
Touch [ VD ] or [ OFF ]. The picture/ sound of the AV
input mode will be switched as follows:
[VD]: When the Video Deck is connected to the
"AV-INPUT2" terminal.
[OFF]: When the "AV-INPUT2" terminal is not used.
Setting the AV Output Mode [AV-OUT]
Touch [ NORM ], [ TV ], [ NAV ], [ VD1 ] or [ VD2 ].
The picture/ sound of the AV output mode will be
switched as follows:
[NORM]:Picture/sound with monitor picture
[TV]: Picture/sound with television
[NAV]: Sound with navigation
[VDI]: Picture/sound with video1
[VD2]: Picture/sound with video2
• No display [VD1] when the "AV-IN1" is set to "OFF".
• No display [VD2] when the "AV-IN2" is set to "OFF".
Touch [ 3 ] to switch to the system setting screen-2.
3
NOTE
2
1
3
2
1
Setting the System
PWR
V.SEL
MODE
–
+
SCRN
R
TN
VD1
SYS EMT
RGB OFF
BEEP
OFFON
NAV
NORM
VD1
AV-OUT
VD2
NAV
R
TN
NAV
NORM
VD1
AV-OUT
SYS EMT
VD
TV
OFF
AV- IN1
VD OFF
AV- IN2
VD2
NAV
R
TN
SYS EMT
BEEP
OFFON
Phone Jack (Ø3.5)
System Setting Screen-1
System Setting Screen-2
LZ_800W_English_ver4 02.12.16 1:17 PM Page 6