Filter
Top Products
English
|
29
4 Make a call
Press the [ENTER] button.
⁄
• Pressing [S.MODE] button each time switches between
name and telephone number.
• The outgoing call list, the incoming call list, and the missed
call list, are the lists of calls originated from and received
at this unit. They are not the ones stored in the cell-phone
memory.
Speed dialing (Preset dial)
1
Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Select the number you want to recall from the
memory
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the [ENTER]
button.
3 Make a call
Press the [ENTER] button.
⁄
• You need to register the preset dial number. Refer to
<Registering to the Preset Dial Number List> (page 29).
Registering to the Preset Dial Number
List
1
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the Phone Book
2 Enter Preset Memory mode
Press the [ ] button.
3 Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press the
[ENTER] button for at least 2 second.
Cancelling the Preset Memory mode
Press the [ ] button.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode
Push the Control knob towards right or left.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the Control knob.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1 Press the [ENTER] button.
2 Turn the Control knob to select “Answer”, and
then press the [ENTER] button.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1 Press the [ENTER] button.
2 Turn the Control knob to select “Reject”, and
then press the [ENTER] button.
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [ENTER] button.
Each pressing of this knob switches the calling
party.