Filter
Top Products
13
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
To Do this
Switch between
hands-free and
private talk modes
Press 6IW during a call.
• Operations may vary according to
the connected Bluetooth device.
Adjust the phone
volume
Turn the volume knob during a call.
Phone volume:
[00]
to
[35]
(Default:
[15]
)
• This adjustment will not affect the
volume of the other sources.
Switch between
two connected
phones
Press repeatedly.
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone...
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to make a selection (see the
following table), then press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press
.
Default:
XX
MIC GAIN –20
—+
8
(
0
):The sensitivity of the microphone increases
as the number increased.
NR LEVEL –5
—
–20
(
–10
):Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL 1
—
10
(
4
):Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
Text message notification
When the phone receives a text message, the unit rings and “SMS RECEIVED”
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1
Press and hold to activate Voice Recognition.
The connected phone (which has been paired the earliest) is activated. However,
if priority device is connected, pressing and holding
activate the priority
device.
(
15, DVC PRIORITY)
2 Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
Bluetooth mode operations
1
Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
To enter
[PHONE BOOK]
directly, press .
(
14, PHONE BOOK)
Press again to switch between the phonebooks of the connected phones.
CALL
HISTORY
1
Press the volume knob to select a name or a phone number.
• “I” indicates call received, “O” indicates call made, “M” indicates call missed.
• Press
DISP SCRL
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
BLUETOOTH®
EN_KMM_BT308U_KN_3.indd 13EN_KMM_BT308U_KN_3.indd 13 14/11/2013 2:17:08 PM14/11/2013 2:17:08 PM